SGP-16S SGP-20S SGP-25S SGP-32S SGP-40S SGP-50S 1 04h8 x 02 x 3 mm 04h8 x 02.6 x 4 mm 05h7 x 03.2 x 4.4 mm 06h7 x 04.2 x 5.3 mm 06h7 x 04.2 x 5.3 mm 08h8 x 05.2 x 5.3 mm 2 M2x2.8 mm M2.5x6 mm M3x7 mm M4x7.5 mm M4x9.5 mm M5x8 mm 3 03H8 x 1.2 mm 04H8 x 2 mm 05H8 x 2.4 mm 06H8 x 2.9 mm 08H8 x 2.5 mm 4 M1.6x2.4 mm M2.5x4 mm M3x5 mm M5x8.4 mm 5 03H8 x 1.5 mm 01.5H8 x 3 mm 02H8 x 4 mm 02H8 x 5 mm 02.5H8 x 6 mm 08H8 x 2.5 mm
5 4 1 3 2
EMIcorp.com 13: GENERAL PURPOSE GRIPPERS
Mounting
The gripper can be mounted to a static or moving part. When on a moving part, you must pay attention to the forces created by inertia over the gripper and its load. 1. To fasten the gripper on one side, use a plate with two through holes and two screws to be screwed on the threaded holes (4). They are on both sides of the gripper housing. The dowel pin holes (5) are on one only side. 2. To fasten gripper to base use two screws passing through the holes in the plate and screwed in the threaded holes (2). Use also the two centering sleeves (1) supplied in the packaging, in the calibrated holes (3).
Compact Parallel Gripper - SGP-S
666
Previous Page