3 4 2 1 2 1 4 3 A SGP-16S SGP-20S SGP-25S SGP-32S SGP-40S SGP-50S 1 M3 M4 M5 M6 2 01.5H8 x 3.5 mm 01.5H8 x 3.5 mm 01.5H8 x 4 mm 02H8 x 5 mm 02.5H8 x 6 mm 03H8 x 8 mm 3 M2 M3 M4 M5 4 03.3 mm 04.3 mm 05.3 mm 06.3 mm A 7.5 mm 9 -0.05 mm 10 -0.05 mm 12 -0.05 mm 16 -0.05 mm 18 -0.05 mm

13: GENERAL PURPOSE GRIPPERS 216-535-4848

Jaw Fastening

The gripping tools must be as short and light as possible. They must be fastened by one screw in the threaded hole (1) to be screwed in the threaded hole (3) on the gripping tool. Or, by a screw passing through (4) and tightened into (1). For a precise positioning on the jaw use the calibrated dimension (A), or the dowel pin holes (2).

Compact Parallel Gripper - SGP-S

Note: '1' dimension is now a threaded mounting hole - 2/2018

EMI Gripper Kit - Two-Jaw SGP32-S for Industrial Cobots

This versatile kit can be adapted to other SGP Gripper sizes. CRK-SGP32S-A Mass: 285g (subject to change per configuration). Includes 5/2 solenoid valve and cable management clamps. Includes 1 inductive sensor for mid-stroke workpiece detection. Includes an interface plate that mounts directly to any robot. Includes 0-8mm V-Groove fingers. See 150 page for more information. 667