EMIcorp.com
Injection Molding Supplies Quality magnets stop tramp metal in its tracks
Positive protection for your equipment and tooling is provided by EMI's heavy-duty drawer magnets. They easily install on your machine throat, protecting valuable equipment, molds and dies. Each model has two rows of 1" diameter, stainless steel, magnetic cartridges, doubling the stopping power and staggered to assure that all material flows around them. EMI's drawer magnets can be provided with undrilled mounting flange and casting, or we'll drill and tap them to your specifications found on our order form.
All EMI drawer magnets are available in stainless steel with rare earth cartridges!
A clear plastic drawer face holds the magnets and removes quickly for cleaning and access. Standard models available in 4" x 4", with a total of three cartridges; 6" x 6", with five cartridges; and 8" x 8", with seven cartridges. The sturdy castings can support symmetrical loads up to several thousand pounds. If loads are not symmetrical, units must be independently braced. Rare earth magnets are strong permanent magnets made from alloys of rare earth elements. They are the strongest type of permanent magnets made and have significant performance advantages over ferrite or alnico magnets due to outstanding surface holding power. To avoid magnetically charging the housing, cartridges containing rare earth magnets are only available using our stainless steel housings. Select model 'DMSR' to begin removing even the smallest ferrous particles!
Shown above: Drawer magnet with optional Slide Gate and Purge Hopper.
Optional features: Slide Shut-off Gate:
Allows easy removal of the drawer face after material in the magnet body is emptied to processing. Included in models with a "GA" suffix. See price charts for more information.
Liquid Dispensing Port:
Allows injection of liquid colorants and can also provide access for temperature probes. $23. Quick# M130
Rear Discharge Dump Tube:
Provides fast drain out of materials left in the magnet body after the shut-off gate is closed. $36. Quick# M131
Purge Hopper:
Allows injection of purging compounds without having to remove the hopper assembly. Magnets protect anything entering through the purge hopper. $81. Quick# M132
Powder Coated Steel Housing - In Stock
Quick# Part# Top Opening Bottom Opening Quantity Pricing (each) 1 2-5 6-10 M101 DM-4GA-STK 2" $499 $474 $449 M102 DM-6GA-STK 3" $612 $581 $550 M103 DM-84GA-STK 4" $764 $726 $688 M104 DM-86GA-STK 6" 4" $764 $726 $688 Note: Stocked units are undrilled.
Drawer Magnet Overview
170
Previous Page