16: NIPPERS EMIcorp.com

Blade Brands

Very good quality at a competitive cost Set-screw mechanical stops are pre-set at the factory ensuring proper blade pressure for a clean, flush cut and long blade life. Should the blade need resharpening, the mechanical stop screw can be reset to allow the resharpened blade to meet original performance specifications. Forged blades from high chromium, high carbon alloy steel and hardened to 60-64 HRC. Reasonable cost and reasonable lead times for custom and carbide blades. Best quality joint of any blade brand, helps reduce the need for sharpening. Top quality blades The "benchmark" quality blade that others are compared to. Very high initial sharpness. Excellent for harder to cut plastics. May take more maintenance to keep blades sharp. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications. Forged blades from high speed steel and hardened. Very high cost and long lead times for custom and carbide blades. A good, basic quality blade at a competitive cost. Blade sharpness has an initial tendency to be more blunt compared to other blades; however, this design will stay sharper longer when other initially sharper blades lose their sharpness. Good for general purpose plastics. Mechanical stops are at the crotch of the blade which ensures a very precise stop, preventing blade bypass and overlap. Should the blade need resharpening, the mechanical stop can usually be hand honed to meet original performance specifications. (Moderate cost). Forged blades from high-speed steel and hardened. Very long lead times for custom blades. Top quality blades. "Benchmark" quality blade. Very high initial sharpness. Excellent for harder to cut plastics. May take more maintenance to keep blades sharp. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be welded and reground to meet original performance specifications. (Higher cost). Forged blades from high-speed steel and hardened. Very high cost and long lead times for custom and carbide blades. A top performing, brand alternative

Only EMI gives you this wide of a selection of in-stock blade brands. Mix and match blade brands with nipper body brands to best suit your application. Check out all the alternatives! Or call our EOAT engineering department for assistance.

858