RT-10 RT-12 RT-20 RT-25 RT-35 RT-45 RT-63 SLEEVE BC RT-20-15 RT-35-15 RT-63-15 DB 07 h8 09 h8 09 h8 015 h8 015 h8 HB 5 6 7 P 3 3.5 4 P2 2.5 3 3.5

1 2 3 4 5

RT-10 RT-12 RT-20 RT-25 RT-35 RT-45 RT-63 A 232N 375N 650N 800N 800N 1075N 1550N R 279N 450N 780N 960N 960N 1290N 1860N M 4.7Nm 9.7Nm 22Nm 34Nm 42Nm 84Nm 143Nm

15: ROTARIES EMIcorp.com

Mounting

The swiveling unit can be fastened to a static or a moving part. When on a moving part, you must pay attention to the forces created by inertia over the unit and its load. Use the four sleeves provided in the packaging to center the rotating load on the pinion.

Swiveling Rotary - RT

SLEEVE BC Safety loads

Check the table for maximum permitted loads. Excessive loads or kinetic energy can damage the unit, cause functioning troubles and endanger the safety of the operator. Use flow controllers (not supplied) to get the right speed. Periodically check the efficiency of the shock-absorbers and replace them immediately if their damping performances decrease. Reference: Force: N x 0.225=lbf Torque: Nm x 8.850=in-lbf Torque: Ncm x 0.089=in-lbf Pressure: bar x 14.5=psi See also: Call our Engineering Department for assistance

802