#3804

3804 2/3 Scale

22 22 70 70 25 25 55 55 15 15 010 10 BOTH ENDS (2x)M4 (2x)M4 10 10 SENSOR SLOT STROKE 20mm 20mm 0.75 0.75 71 71 (2X)M5 AIR PORT (2x) 03.4 THRU ALL 06.5 06.5 4 14: AIR CYLINDERS & SLIDES EMIcorp.com

Deep-cored parts such as cups, pails, and buckets usually require gripping on the side of the part. To prevent the vacuum cups from dragging against the part, a separately actuated assembly is required. As the EOAT advances toward the part in the mold, there must be clearance between vacuum cups and the part. Once the EOAT is in position, the vacuum cups generate vacuum as they make contact with the part. Initially, the cylinder in this illustration appears to be mounted 'backwards.' But actually, this mounting configuration is preferred because it eliminates the torsional force on the air cylinder rod. When the cylinder rod is retracted into the cylinder body, it pulls the vacuum cups in contact with the part. And because the cylinder rod is not extended, there is no torsional force on it.

Quick# Part# >ASS< # Price Stroke Extension force* Retraction force* Wt. 3804 SZD12-20A 1-715-06-00 $156.45 20mm 15 lbf 11 lbf 98g 3814 SZD20-50A 1-715-42-00 $169.05 50mm 42 lbf 32 lbf 334g 3824 SZD32-50A 1-715-72-00 $189.53 50mm 108 lbf 81 lbf 567g

Order 3-wire sensors separately

*Note: Force at 87psi (6 bar) 5430 D-M9PL $33.70 PNP, Straight with lead, 3m long 2412 D-M9NL $33.70 NPN, Straight with lead, 3m long 5497 D-M9P SAPC $42.06 PNP, Straight with M8 connector, 0.5m long 5498 D-M9N SAPC $42.06 NPN, Straight with M8 connector, 0.5m long Includes mounting fasteners: (2x) M3x45mm (Dimensioned drawings shown 2/3 scale)

Compact Cylinders with Integrated Clamp Arm - SZD

Mounting brackets on pages 766-767

Note: Additional cylinder strokes from 10mm-50mm of each bore can be found online.

760