SZ08 SZ12 SZ16 SZ20 SZ25 SZ32 SZ40 F s 10 N 50 N 100 N 150 N 200 N 400 N 700 N Mx s 0.25 Nm 0.5 Nm 2 Nm 4 Nm 6 Nm 18 Nm 36 Nm My s 0.25 Nm 0.3 Nm 1.5 Nm 3 Nm 4 Nm 12 Nm 24 Nm Mz s 0.25 Nm 0.5 Nm 2 Nm 4 Nm 6 Nm 18 Nm 36 Nm F d 0.2 N 1 N 2 N 3 N 4 N 8 N 12 Nm Mx d 0.25 Nm 1Ncm 4 Ncm 8 Ncm 12 Ncm 24 Ncm 36 Ncm My d 0.25 Nm 0.8 Ncm 3 Ncm 6 Ncm 8 Ncm 16 Ncm 24 Ncm Mz d 0.25 Nm 1 Ncm 4 Ncm 8 Ncm 12 Ncm 24 Ncm 36 Ncm m 0.3s - 800g 1200g m 0.2s - 300g 400g 600g 900g m 0.12s - 200g 250g 320g 400g 600g m 0.07s 20g 100g 160g 200g 240g 300g - m 0.05s 15g 80g 120g 150g 160g - m 0.04s 10g 60g 80g - m 0.02s 8g 40g -
13: GENERAL PURPOSE GRIPPERS 216-535-4848
Reference: Force: N x 0.225 = lbf Torque: Nm x 8.850 = in-lbf Torque: Ncm x 0.089 = in-lbf Pressure: bar x 14.5 = psi
Safety loads
Check the table for maximum permitted loads. Excessive forces or torques can damage the gripper, cause functioning troubles and endanger the safety of the operator. Fs, Mx s, My s, Mz s, are maximum permitted static loads. Static means with motionless jaws. F d, Mx d, My D, Mz d, are maximum permitted dynamic loads. Dynamic means with running jaws. The following tables show the specified maximum loads (m) on each gripping tool as function of closing or opening time. Use flow controllers (not supplied) to get the proper speed.
Wide Angle Gripper - SZ
Fittings Available on page 1047
689
Previous Page