F G
C D A B A X Y E
GW-10 GW-16 GW-20 GW-25 A M3 x 5.5mm M4 x 8mm M5 x 10mm M6 x 12mm B M2.5 x 22mm M3 x 30mm M4 x 35mm M5 x 45mm C M3 x 6mm M4 x 8mm M5 x 10mm M6 x 12mm D 11H9 x 1.5mm 17H9 x 1.5mm 21H9 x 1.5mm 26H9 x 1.5mm E M3 x 6mm M4 x 6.5mm M5 x 8mm M6 x 10mm F 6.4
-0.1
mm 8
-0.1
mm 10
-0.1
mm 12
-0.1
mm G M2.5 x 4mm M3 x 7mm M4 x 8mm M5 x 10mm GW-10 GW-16 GW-20 GW-25 SC - X = 2mm X = 0mm SL X = 10mm + cable SN X = 2mm X = Y = 3mm X = Y = 2mm SS X = 2mm + cable X = Y = 3mm + cable X = Y = 2mm + cable
EMIcorp.com 13: GENERAL PURPOSE GRIPPERS
Gripper tool fastening
The gripping tools must be as short and light as possible. They must be fastened by two screws (G). For a precise positioning on the jaw use the calibrated dimension (F).
Fastening
The gripper can be fastened to a static or moving part. When on a moving part, you must pay attention to the forces created by inertia over the gripper and its load. See 'Sensor Type' chart below Sensor Type
Angular Gripper - GW
652
Previous PageNext Page