Sensor LED
3
Sensor LED
2
Sensor LED
1
Se Sensor LED Senso LE
25
16 16 4 35.6 35.6 16.9 16.9 24 24
(2X) (2X) 0 THRU THRU MOUNTING HOLES HOLES M5 AIR PORTS (USE EITHER) 05.5 05.5 THRU THRU MOUNTING HOLES HOLES
8 15 15 80.9 80.9 15 15
0 10 0 10 MOUNTING SHAFT 4.3 4.3
25 25
10: SPRUE GRIPPERS EMIcorp.com
(Dimensioned drawings shown full scale)
Original Style Mini Sprue Gripper with Sensor Jaw - PB-0013
Sprue gripper is CLOSED; and missing the sprue. The metal spring loaded lever arm remains in its open position although the gripper is closed. Sprue gripper is CLOSED; and gripping the sprue. Pressure from the sprue deflects the metal spring loaded lever arm into the gripper finger. The close proximity of the lever arm to the sensor closes the circuit, illuminates the LED, and indicates that the sprue is gripped. Sprue gripper is OPEN; and ready to grip sprue. The red spring loaded lever arm is open. The sensor circuit is 'open.'
SPRUE SENSING
Simple, easy sensing. A single sensor mounted on the finger confirms 'sprue gripped' and eliminates the 'hide and seek' process of sensor set-up. Steel trigger is longer lasting and has a higher temperature range than the previous red plastic finger. Higher grip force than other similarly sized sprue grippers. Serrated fingers hold small and medium sprues firmly. 010mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used. Quick# Part# Price Style Applicable Sprue 0 Closing Force at 25mm Tooling Length* Weight 1878 GSG-PB-0013S $113.00 w/ Sensor Trigger 3-9mm 14.5 lbf 48g Order sensors separately
See Sensor Reference Guide on page 1008 for a complete list of sensors for PB Grippers.
1882 SS4N225G $27.20 PNP sensor with lead, 2.5m long 6-24vdc 6282 SS3N203G $31.16 PNP sensor M8 male connector, 0.3m long** 6-24vdc 1883 SS4M225G $27.20 NPN sensor with lead, 2.5m long 6-24vdc 1884 SS3M203G $31.16 NPN sensor M8 male connector, 0.3m long** 6-24vdc
Note: 2-wire reed sensors are not recommended for grippers.
* The Closing Force listed is both jaws combined when supplied at 87psi. Tooling length is measured from jaw pivot point.
(**)
M8 Extension cables Quick#'s 2582 & 2583 available on page 987.
Tooling Length
The Original!
#1878
$113.00
430
Previous Page