#5543 #5601 #145
19: TUBING & FITTINGS EMIcorp.com
Our Best full-flow fittings have no internal ID restrictions, even in T's and Elbows. D in mm matches Tubing OD. Metric thread sizes M3, M5, and G1/8". Integrated O-ring assures long- lasting leak-free seals in vacuum and compressed-air applications. Body can be swiveled independently from threaded fitting for alignment purposes. Full-flow fittings have no internal ID restrictions, even in T's and Elbows.
Good
Compact, lightweight design Improved tube insertion & removal Tapered thread and seal tape for a good vacuum seal
Best
Compact, lightweight design Parallel thread with soft seal O-ring for the best vacuum seal
Better
Medium weight Medium size Soft seal O-ring for a better vacuum seal (Shown Actual Size)
Push-In Fittings
BSP taper (ex; R1/8") BSP thread (British Standard Pipe) BSP parallel (ex; G1/8") BSP parallel (ex; G1/8") BSP taper (ex; R1/8") " G " parallel " R " taper NPT taper NPT taper Metric parallel (ex; M5) NPT thread Metric thread Metric parallel (ex; M5) Special Note: M5 fits with 10-32 UNF.
Note: Older usage can be as follows: Rp = parallel, Rc = taper
What is G1/8" thread? Features of Our Best Push-In Fittings
G1/8" thread is a British Standard Pipe (BSP) specification. It is used throughout Europe and is frequently used in conjunction with metric M threads. It comes to North American robot end- of-arm tooling via the presence of European robot suppliers. Specifically, G1/8" is a parallel thread having 28 threads per inch. Sealing is ensured by an O-ring or washer ring. (1/8" NPT is a tapered thread with 27 threads per inch.) See adaptor fittings on page 1068. G1/8" taps are available on page 1076. Material is glass filled Nylon. NPT thread is not compatible with G, M or R type threads
1046
Previous Page