11/2022
426
www.emicorp.com/gimatic 216-535-4848 0.8 MPa 0.4 MPa 156 Nl/min 220 Nl/min 50 Nl/min 190 Nl/min 0.25 bar 12 ms 5 ms -95 kPa +32 - +140 F 800 g IP54 24 Vdc (10%) 1 ms 0-5 Vdc EJ-XPRO
NEW
Introduction Vacuum theory Suction cups Vacuum pumps Customised solutions Suspensions System accessories
EJ-XPRO
Vacuum pump with advanced control functions, available with two-stage EJ-LARGE cartridges with non-return valve (EJ-HF, EJ-HV, EJ-LP) Energy saving system (ES), with manual and automatic modes, that saves up to 95% of compressed air in sealed applications Blow-off mechanism electrically controllable by pin or automatically at each cycle Large TFT colour display with intuitive and easy-to-read menu and pump status indications Electrical connection via M12 8-pin connector It can be installed in series (max 4 units) Application example Typical applications Unstacking and transfer from presses Removal of plastic parts Ergonomic manipulators where safety and ease of use are key features In applications that require an integrated control system with reduced weight and compact dimensions (electronics sector) Handling of objects with high weight and sealed surface (glass/ sheet metal)
Vacuum pumps / EJ-XPRO
Pneumatic specifications Max feed pressure Minimum supply pressure Maximum air consumption for vacuum generation Maximum air consumption for blow-off Maximum blow-off flow rate Maximum suction flow rate Maximum blow-off pressure (zero flow rate) Valve opening time Valve closing time Supply Dry air Pneumatic supply connection G1/4" female Vacuum channel connection G1/2" female Maximum vacuum level Technical Features Operating temperature range Mass IP rating Materials Alloy 6082-T6, PA66+FG 30%, AISI 303, TPU, PC Operating voltage Electrical connection M12 8-pin male Manual controls Yes, monostable buttons Vacuum transducer response time Vacuum level analogue output Valve controls Digital PNP/NPN
Previous Page