11/2022

325

www.emicorp.com/gimatic 216-535-4848

from

2.5 mm 4 mm 6 mm 2.5 mm 8 mm 12 mm 8 mm 10 mm 15 mm Introduction Vacuum theory Suction cups Vacuum pumps Customised solutions Suspensions System accessories Connections EJ-SMALL cartridge EJ-MEDIUM cartridge EJ-LARGE cartridge Compressed air Vacuum Exhaust

MATERIALS RECOMMENDED TUBE DIMENSIONS (internal diameter) EJ-LP (LOW PRESSURE)

The EJ-LP cartridges can reach a high vacuum level with low feed pressure. They are recommended both in applications such as the handling of glass panels or metal sheets and in all sealed circuits, where a good flow rate at a high vacuum level is required.

EJ-HF (HIGH FLOW)

EJ-HF cartridges evacuate large volumes of air. They are therefore suitable for handling porous objects such as cardboard, wood and materials with uneven surfaces. Ideal where it is necessary to evacuate large volumes of air to keep the circuit at a certain level of vacuum during the production cycle, compensating for any leaks.

EJ-HV (HIGH VACUUM)

EJ-HV cartridges are ideal for sealed applications such as glass panel handling, metal sheet handling and thermoforming applications.

CHARACTERISTICS

PA= Polyamide, Nylon Al= Aluminium NBR= Nitrile SS= Stainless steel

* Applies to pipes up to 1.5 m long