PQ1608 PQ2012 PQ2516
A 24 30 36 B 18 23 28 C 20 25 29 D 14 17 21 E 7 9 16 F 19.4 24 28 G 11 13.8 16 H 44 46.5 57 I 32.5 37.5 J 43.5 46 56 K 17.5 22.4 27 L 32 42 52 M 4 6 8 N 11 13.5 18 O 26 26.5 28.5 P 21 26 31 Q 7.5 8.5 11 R 17 21 24 S 13.5 15.3 16 T 7 7.5 8 U 3.7 4 8 V 5.5 6.9 8 W 13 17 21 X 9 11 13 Y 6 8 9
PQ1608 PQ2012 PQ2516
Z1 5 6 Z2 M3 M4 Z3 1.2 2.5 Z4 4 5 7.5 Z5 05 06 Z6 02.6 03.2 Z7 3 3.5 Z8 02H7 02.5H7 03H7 Z9 M3 M4 Z10 5 6 Z11 3 5 Z12 02.5H7 03H7 Z13 3 5 Z14 M2.5 M3 Z15 M3 M5 Z16 M2.5 M3 Z17 M5 Z18 - Z19 - Z20 5 Z21 M3 M4 M3 Z22 - Z23 M5
K I J G (x2) Z6 Z7 B A B D E Z10 11 O H (x2) Z12 Z13 (x2) Z5 C A C F P D F P E L M N R Z11 (x2) Z8 V Y WX (x2) Z9 (x2) Z24 Z1 Z2 Z3 Z4 S Q T S U (x2) Z23 (x2) Z22 (x2) Z21 PQ1608 PQ2012 PQ2516
13: GENERAL PURPOSE GRIPPERS 216-535-4848
For more information visit: www.EMIcorp.com
Two-Jaw Self-Centering Parallel Gripper - PQ
Z1 - Spot face for the centering sleeve of the gripping tool Z2 - Threaded hole for the gripping tool fastening Z6 - Through hole for the gripper side fastening Z9 - Threaded hole for the gripper fastening on the bottom Z12 - Spot face for the centering sleeve of the gripper body Z15 - Through hole for the gripper fastening on the bottom Z17 - Main port for air fittings Z21 - Ports for direct air supply from the bottom Z22 - Air supply ports Z23 - Air supply ports Z24 - C-slot sensor slots W X is the range of distance from centerline (min to max). Minimum is the X dimension (fully closed), Maximum is the W dimension (fully open).
729
Previous Page