H L N M
E D B Y A C F G
GX-10S GX-16S GX-20S GX-25S A M3 x 6mm M4 x 8mm M5 x 10mm M6 x 12mm B M3 x 22mm M4 x 30mm M5 x 35mm M6 x 40mm C 3.4mm 4.5mm 5.5mm 6.6mm D M3 x 4mm M4 x 5mm M5 x 8mm M6 x 10mm E 3H9 x 3mm 4H9 x 4mm F M3 x 6mm M4 x 8mm M5 x 10mm M6 x 12mm G 11H9 x 1.5mm 17H9 x 1.5mm 21H9 x 1.5mm 26H9 x 1.5mm H 6
-0.01
mm 8
-0.01
mm 10
-0.01
mm 12
-0.01
mm L M3 x 4mm M3 x 5mm M4 x 8mm M5 x 10mm M 11.7mm 14mm 18.7mm 22.5mm N 13mm 15mm 20mm 24mm GX-10S GX-16S GX-20S GX-25S SN Y = 4mm Y = 2mm Y = 1mm Y = 0mm SS Y = 4 mm + cable Y = 2mm + cable Y = 1mm + cable Y = 0mm + cable
EMIcorp.com 13: GENERAL PURPOSE GRIPPERS
Sensor Type
Gripper tool fastening
The gripping tools must be as short and light as possible. They must be fastened by two screws (L). For a precise positioning on the jaw use the calibrated dimension (H). Pay extra attention to dimensions (M) and (N).
Fastening
The gripper can be fastened to a static or moving part. When on a moving part, you must pay attention to the forces created by inertia over the gripper and its load.
Radial Gripper - GX-S
702
Previous Page