PN-010-2 PN-010-3 PN-016-2 PN-016-3 PN-025-2 PN-025-3 PN-040-2 PN-040-3 F 12N 23N 103N 191N Mf 0.2 Nm 0.4 Nm 4 Nm 10 Nm C A B S00 SM CB Q#6591 / CFSM890325
13: GENERAL PURPOSE GRIPPERS 216-535-4848
Safety loads
Please observe on the following table the maximum permitted values. Overloading can damage the gripper cause functioning troubles and endanger the safety of the operator. F, Mf: are maximum permitted static loads. Reference: Force: N x 0.225 = lbf Torque: Nm x 8.850 = in-lbf For CB3.N mounting: 1- Insert the square nut (A) in its seat on the "S 00" bracket 2- Insert the bracket into the groove 3- Insert the sensor into the bracket 4- Run the sensor until the lamp is on 5- Lock the bracket with the screw (B) but don't over tighten it For SM3NR mounting: 1- Insert the sensor in the groove till the working place 2- Tighten the grub screw (C) with care
Sensors
The operating position can be checked by sensors fitted in the guides of the grippers body. These sensors detect the position by means of a magnet placed in the piston. Quick# Part# Signal Connection Price PN-010 & PN-016 PN-025 & PN-040 1792 SM3MR2-G NPN with cable & M8 Connector $29.50
R
*
6276 SM3NR2-G PNP with cable & M8 Connector* $29.54
R
*
6126 CB3N2-G PNP with M8 Connector $22.90
*
R
1794 CB3M2-G NPN with M8 Connector* $22.90
*
R
(*) Purchase extension cable #6591 separate for these sensors. 6591 CFSM890325 3m 3-wire extension with M8 female connector $7.18
Compact Angular Gripper - PN
693
Previous Page