GS-10 GS-16 GS-20 GS-25 GS-32 GS-40 F s 25N 50N 75N 125N 200N 300N Mx s 0.4Nm 1.5Nm 5Nm 8Nm 18Nm 30Nm My s 0.4Nm 1.5Nm 5Nm 8Nm 12Nm 20Nm Mz s 0.4Nm 1.5Nm 5Nm 8Nm 18Nm 30Nm F d 0.4N 0.8N 1.5N 2.5N 3.5N 4.5N Mx d 0.4Ncm 1.5Ncm 5Ncm 8Ncm 18Ncm 30Ncm My d 0.4Ncm 1.5Ncm 5Ncm 8Ncm 18Ncm 30Ncm Mz d 0.4Ncm 1.5Ncm 5Ncm 8Ncm 18Ncm 30Ncm m 0.2s 40g 80g 150g 250g 350g 450g m 0.12s 35g 65g 125g 200g 250g 300g m 0.09s 30g 55g 100g 150g 200g - m 0.07s 25g 45g 75g 100g - m 0.05s 20g 35g 50g - m 0.02s 15g 25g - m.0.01s 10g -
NC NO
EMIcorp.com 13: GENERAL PURPOSE GRIPPERS
Spring open or Spring close
It is also available, on request, with a closing (-NC) or opening (-NO) spring, providing, after a pressure black-out, about one-fourth of the output force at 87psi.
Safety loads
Check the table for maximum permitted loads. Excessive forces or torques can damage the gripper, cause functioning troubles and endanger the safety of the operator. F s, Mx s, My s, Mz s, are maximum permitted static loads. Static means with motionless jaws. F d, Mx d, My d, Mz d, are maximum permitted dynamic loads. Dynamic means with running jaws. The following tables show the specified maximum loads (m) on each gripping tool as function of closing or opening time. Use flow controllers (not supplied) to get the proper speed.
Gripping
The gripper is double-acting for either internal (A) or external (B) gripping applications. The opening force is higher. Reference: Force: N x 0.225 = lbf Torque: Nm x 8.850 = in-lbf Torque: Ncm x 0.089 = in-lbf Pressure: bar x 14.5 = psi Call our Engineering Department for assistance
Pressurized Chamber
Parallel Gripper - GS
642
Previous Page